Make OpenELEC/Kodi work with the Sitecom CN-524/ Cambridge Silicon Radio (CSR) 8510 A10 Bluetooth USB adapter on the Raspberry Pi.
Published: 01-10-2015 | Author: Remy van Elst | Text only version of this article
❗ This post is over seven years old. It may no longer be up to date. Opinions may have changed.
Recently I set up a Kodi (XMBC) media center on a Raspberry Pi. The setup is mounted on a flatscreen TV and uses a small Wifi dongle for network access and a small Bluetooth dongle for a Rapoo E6700 wireless bluetooth keyboard/touchpad.
I'm developing a desktop monitoring app, Leaf Node Monitoring, open source, but paid. For Windows, Linux & Android, go check it out.
Consider sponsoring me on Github. It means the world to me if you show your appreciation and you'll help pay the server costs.
You can also sponsor me by getting a Digital Ocean VPS. With this referral link you'll get $100 credit for 60 days.
This is a nice bluetooth keyboard/mouse combo for a media center, it charges via micro USB. That saves a lot of battery hassle. The bluetooth adapter is a Sitecom CN-524, which was the only one my local electronic store had available.
Bluetooth boot mode
It however does not work with linux/Kodi by default. This is because the device boots in a wrong mode, HID, instead of HCI. On my Linux Mint and Ubuntu machines it wasn't recognized as well, and the usb_modeswitch tools didn't help. This website has a fix for that in the comments which is posted here as well.
You do sadly need a Windows machine for it. I used Windows 7 in a Virtualbox VM with USB passthrough.
- Don't plug in the bluetooth dongle yet (or enable passthrough in the VM)
- Download the BlueSuite to modifiy "BlueCore Persistent Store": http://www.kcwirefree.com/docs/BlueSuite 2 5.zip
- Install the BlueSuite Software (default options)
- Plug the bluetooth dongle in (enable passthrough in the VM)
- Run CSR BlueSuite 2.5.0 / PSTool as Administrator
- In the first window choose "Transport" =
USBand "Port" =
\\.\csr0and click OK
- In the filter box, type "bootmode" then click on the item
Initial device bootmode
- Note the hex number in case something goes wrong (mine was empty), then change it to
- Click on the Set button then click on the Close button
- Wait a few seconds then unplug the bluetooth dongle.
After I did this the bluetooth dongle worked without issues on Ubuntu and my Linux Mint machine. The Raspberry Pi / Kodi setup required some more steps.
Kodi / OpenELEC configuration
Make sure you enable SSH via the OpenELEC settings. The default username /
openelec. Login via SSH and make sure the bluetooth
adapter is listed in the output of
Bus 001 Device 005: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
If that is the case, continue on.
The bluetooth adapter is down by default. Check it with the
hci0: Type: BR/EDR Bus: USB BD Address: 00:09:DD:50:29:EF ACL MTU: 310:10 SCO MTU: 64:8 DOWN RX bytes:108 acl:0 sco:0 events:0 errors:0 TX bytes:104 acl:0 sco:0 commands:0 errors:0
Turn it on with the following command, and check the status again with
hciconfig hci0 up hciconfig
hci0: Type: BR/EDR Bus: USB BD Address: 00:09:DD:50:29:EF ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING RX bytes:1008 acl:0 sco:0 events:42 errors:0 TX bytes:164 acl:0 sco:0 commands:40 errors:0
Now turn on the bluetooth daemon, otherwise OpelELEC doens't pick it up:
There is no output of this command.
Now try to pair the bluetooth keyboard via the OpenELEC settings program, it should work. You enter a code from the screen in the keyboard and after that it works every time you turn the keyboard on by default.
To make these settings permanent, add the following to the file
nano /storage/.config/autostart.sh ( hciconfig hci0 up; /usr/lib/bluetooth/bluetoothd; ) &
Test it by rebooting the Pi. The keyboard should work by default again.cTags: bluetooth , debian , kodi , raspberry-pi , raspberrypi , sitecom , tutorials , xbmc