Local W3C HTML5 Validator Server
Published: 27-12-2013 | Author: Remy van Elst | Text only version of this article
❗ This post is over eight years old. It may no longer be up to date. Opinions may have changed.
Table of Contents
This tutorial shows you how to set up a local instance of the w3c html validator, including HTML5 validation support via a local instance of the Validator.nu HTML5 validator. The online w3 validator has strict limits and will ban you for some time if you validate to often. So if you for example have a local unit test to check a website you will get banned a lot. Which is understandable of course, it is a free service. They provide all source code plus it is in the debian repositories, it is dead simple to set up one yourself.
I'm developing a desktop monitoring app, Leaf Node Monitoring, open source, but paid. For Windows, Linux & Android, go check it out.
Consider sponsoring me on Github. It means the world to me if you show your appreciation and you'll help pay the server costs.
You can also sponsor me by getting a Digital Ocean VPS. With this referral link you'll get $100 credit for 60 days.
I've used Ubuntu 13.10 because that has the latest w3 test (1.3). If you use
Ubuntu 12.04 LTS and you want the latest version you can install the two
w3c-sgml-lib) from the raring
repositories (13.04), that works just fine.
- Installing required packages
- Compiling / Installing HTML5 Validator.nu
- Configuring the w3c-validator
- Upstart script for the HTML5 validator
Installing required packages
Install all required packages:
apt-get install w3c-markup-validator mercurial subversion python default-jdk
This will install everything required for the w3 validator and for the HTML 5
one (that is Java). It will also pull down Apache. After the install finished
you can reach your validator already at
However, it is not yet configured for HTML5 validation, which is kinda required
for todays web.
Compiling / Installing the HTML5 Validator.nu
The W3 validator itself does not do HTML5 validation. It does support using external services to do it, and we are going to do it with the HTML5 validator from http://validator.nu.
Create a folder:
mkdir /usr/share/html5-validator cd /usr/share/html5-validator
Clone the latest validator source:
hg clone https://bitbucket.org/validator/build build
Start the build:
python build/build.py all
If you encounter a Java exception, run the build script again. I had to do it three times:
python build/build.py all
If it all works after a few tries, the validator runs at
Kill it with CTRL+C and continue reading. We first configure the W3 validator and then create an upstart script for the Validator.nu one.
Configuring the w3c-validator
I need to validate hosts in private networks, so I changed the below option in
Allow Private IPs = yes
Enable the HTML5 validator by uncommenting the following:
<External> ## Enable checking documents via external services. ## The example config below assumes that you have installed the validator.nu ## engine on the same machine as the markup validator. ## See http://about.validator.nu/ for installation instructions. HTML5 = http://localhost:8888/html5/ #CompoundXML = http://localhost:8888/ </External>
Upstart script for HTML5 validator
Create the upstart script to start the HTML5 validator at boot:
description "Validator.nu HTML5 Validator" start on (local-filesystems and net-device-up) stop on runlevel  chdir /usr/share/html5-validator exec python build/build.py --control-port=8889 run respawn
Save and start it:
Afterwards you can access your validator via
supports the HTML5 validator from there, but you can also access it directly at
The validator.nu service is running as root and there are no limits on both validators. Make sure you only run it on a trusted network, or properly secure it.Tags: html , html5 , tests , tutorials , validation , validator , w3 , w3c