OpenVZ dnsmasq set capabilities failed fix
Published: 14-08-2013 | Author: Remy van Elst | Text only version of this article
❗ This post is over eight years old. It may no longer be up to date. Opinions may have changed.
When running dnsmasq under OpenVZ I sometimes get an error when restarting: set capabilities failed. This is because dnsmasq starts as root, then does privileged stuff and then drops to the configured run user. In OpenVZ these permissions are not passed to the VPS, sadly. These three commands fix the problem.
Consider sponsoring me on Github. It means the world to me if you show your appreciation and you'll help pay the server costs.
You can also sponsor me by getting a Digital Ocean VPS. With this referral link you'll get $100 credit for 60 days.
Replace 195 with your container ID in the steps below.
Stop the container:
vzctl stop 195
Give it extra permissions:
vzctl set 195 --capability setuid:on --save vzctl set 195 --capability net_admin:on --save vzctl set 195 --capability net_raw:on --save
Then start it again:
Tags: dhcp , dns , dnsmasq , kernel , openvz , snippets , virtualization
vzctl start 195